Advanced level Flash - Nissin Di600
Variety TTL function．Cost-performance value
The new Nissin Di600 offers Wireless TTL Remote capabilities along with plenty of power. This flash is powerful enough to fill shadows on even the sunniest of days. The Di600 supports original Canon, Nikon and Sony TTL systems.
Key Features:
The Nissin Di600 has a flash output of GN44 at 105mm. The zoom range auto adjusts from 24mm-105mm. The flash comes equipped with a built-in diffuser that gives a 16mm lens coverage. The flash head tilts up to 90°, and rotates horizontally 90° to left and 180° to right; making bounced lighting more versatile by utilizing more angles; In addition, the flash can be easily used in a manual or a slave mode. Light output on the Di600 is fully adjustable down to 1/32 in manual and slave modes. In TTL mode, the flash output is controlled by the camera. Flash compensation can be controlled on the back of the flash in ½ EV increments. The Di600 flash recycles in about 5 seconds when using 1/1 full power output.
Wireless Remote Flash
Creative lighting is a snap with the ability to utilize multiple flashes. The Di600 has a self-contained wireless remote flash system that allows it to be used as slave unit. The 3 slave modes available are described below.
Slave Digital (SD): Nissin Di600 synchronizes to the pre-flash system. The master flash is to be set at TTL (E-TTL II/ E-TTL for Canon, i-TTL for Nikon and ADI/ PTTL for Sony) mode.
Slave Film (SF): Nissin Di600 synchronizes to the traditional single flash system. The master flash is to be set to manual mode. Studio lighting system can be synchronized to this mode.
Wireless TTL: Nissin Di600 synchronizes to the wireless remote flash system with the use of a master controller. Make adjustments to the Di600 by way of Channel 1 group A on your master.
Nissin Original “MY TTL” Setting
The TTL flash power level is pre-set for exposure at the factory. However, you can reset the power to the desired exposure level, in +/- 0.75 Ev. by 0.25 Ev increments. The pre-set value is memorized as your personal standard after switching the unit off. The normal TTL calculations are now based off of this customized setting.
External Synchro Contact
The Nissin Di600 can be used off camera using the Sync Contact. Using the standard 3.5mm and a PC sync terminal the flash can be hard wired to the camera.
Comments